How to calculate quilt binding
Utah State University Extension measures once around the quilt, adds 7 – 12 inches to allow for joining the strips and turning the corners, and divides by 40 inches, the average usable width of fabric. The number of strips is always rounded up, and the strips times their width is the fabric you need:
Here it is with your numbers:
- Binding: 2 × (56 + 70) + 10 = 262 inches
- Strips: 262 ÷ 40 = 6.55, so 7 strips (always round up)
- Fabric: 7 × 2.25 = 15.75 inches (0.44 yd)
It means 7 strips joined end to end give 280 inches of binding, 18 more than you need, from ½ yard of fabric.
USU’s yardage table works in quarters and thirds of a yard (9″ is ¼ yard, 12″ is ⅓, 18″ is ½, 36″ is 1 yard), so the calculator rounds the fabric up to the next one of those.
Source Utah State University Extension · Binding a Quilt ↗Utah State University Extension · Double Crosswise Grain Binding ↗NIST Handbook 44 (2026) · Appendix C, General Tables of Units of Measurement ↗
Binding for common quilt sizes
With 2.5″ strips, 10″ extra and 40″ of usable fabric. Tap a size to open it in the calculator.
| Quilt | Binding | Strips | Buy |
|---|---|---|---|
| 36″ × 52″ | 186″ | 5 | ½ yard |
| 50″ × 65″ | 240″ | 6 | ½ yard |
| 60″ × 80″ | 290″ | 8 | ⅔ yard |
| 70″ × 90″ | 330″ | 9 | ⅔ yard |
| 90″ × 108″ | 406″ | 11 | 1 yard |
| 108″ × 108″ | 442″ | 12 | 1 yard |
FAQs
How do I figure out how much binding I need for my quilt?
Add the length and width, double it to go around all four sides, and add 7 – 12 inches for joining strips and turning corners. A 56″ × 70″ quilt needs 56 + 56 + 70 + 70 + 10 = 262 inches.
What is the best width for quilt binding?
Utah State University Extension cuts double binding strips 2.25″ wide for thin batting or 2.5″ for thick batting, folded in half along their length.
Source Utah State University Extension · Double Crosswise Grain Binding ↗
How do I calculate how much fabric I need for a quilt binding?
Divide the binding length by the usable width of the fabric (about 40″) and round up to whole strips, then multiply by the strip width. For 262″: 262 ÷ 40 = 6.55, so 7 strips, and 7 × 2.25 = 15.75″ of fabric. That is 0.44 yard, so buy ½ yard.
Sources
- Utah State University Extension: Binding a Quilt
- Utah State University Extension: Double Crosswise Grain Binding
- NIST Handbook 44 (2026): Appendix C, General Tables of Units of Measurement