How to add feet and inches
Turn each length into inches (feet × 12, plus the inches and the fraction), add or subtract, then divide by 12: the whole number is feet and the remainder is inches. Round what's left to the nearest mark on your tape, usually 1/16 inch.
Here it is with your numbers:
- First length: 5′ 7 3/8″ = 67.375 in.
- Second length: 2′ 9 1/2″ = 33.5 in.
- Add: 67.375 + 33.5 = 100.875 in.
- Feet: 100.875 ÷ 12 = 8 ft, remainder 4.875 in, so 8′ 4 7/8″ to the nearest 1/16.
It means 5′ 7 3/8″ + 2′ 9 1/2″ comes to 8′ 4 7/8″ on a tape measure, or 256.22 cm.
Source NIST Handbook 44 (2026) · Appendix C, General Tables of Units of Measurement ↗
Fractions of an inch as decimals
Each mark on a tape measure is 1/16 inch. One inch is exactly 25.4 millimeters.
| Fraction | Inches | Millimeters |
|---|---|---|
| 1/16″ | 0.0625 | 1.59 |
| 1/8″ | 0.1250 | 3.18 |
| 3/16″ | 0.1875 | 4.76 |
| 1/4″ | 0.2500 | 6.35 |
| 5/16″ | 0.3125 | 7.94 |
| 3/8″ | 0.3750 | 9.52 |
| 7/16″ | 0.4375 | 11.11 |
| 1/2″ | 0.5000 | 12.70 |
| 9/16″ | 0.5625 | 14.29 |
| 5/8″ | 0.6250 | 15.88 |
| 11/16″ | 0.6875 | 17.46 |
| 3/4″ | 0.7500 | 19.05 |
| 13/16″ | 0.8125 | 20.64 |
| 7/8″ | 0.8750 | 22.23 |
| 15/16″ | 0.9375 | 23.81 |
FAQs
What is the ft symbol?
ft is the symbol for foot (and feet), and in for inch, as NIST lists them in Handbook 44: "12 inches (in) = 1 foot (ft)".
Source NIST Handbook 44 (2026) · Appendix C, General Tables of Units of Measurement ↗
How to write 5 feet 9 inches?
5 ft 9 in, using the symbols NIST lists. In inches alone it is 69 in, and in feet 5.7500 ft.
How many inches is 5 ft 4?
64 inches. Multiply the feet by 12 and add the inches: 5 × 12 + 4 = 64.