Paver Calculator

A 20 × 15 ft patio laid with 6 × 6 in pavers needs 1,320 pavers: 300 sq ft at 4 pavers a square foot is 1,200, plus 10% for cuts and breakage. Enter your area’s length and width (or its square feet), the size of one paver and the extra you want, and get the pavers to buy, rounded up, with the working shown.

%
Pavers to buy
1,320

For 300 sq ft of 6 × 6 in pavers, buy 1,320 pavers (1,200 plus 10% extra).

Area 300 sq ft
Pavers without extra 1,200
Pavers per sq ft 4

How many pavers do I need?

Measure the area in feet and multiply the length by the width to get square feet. Then divide by the area one paver covers and add extra for the pavers you cut at the edges or break. The paver maker Western Interlock’s example: 300 sq ft of 6 × 6 in pavers (0.25 sq ft each) is 1,200 pavers, or 1,320 with 10% extra.

Source Western Interlock · How to Calculate Paver Stones Needed for Your Project ↗

How to calculate pavers

Pavers = area ÷ area of one paver × (1 + extra ÷ 100), rounded up

Here it is with your numbers:

  1. Multiply the length by the width: 20 × 15 = 300 sq ft.
  2. One paver: 6 × 6 = 36 sq in.
  3. Change the area to square inches (× 144) and divide by one paver: 300 × 144 ÷ 36 = 1,200 pavers.
  4. Add 10% extra: 1,200 × 1.1 = 1,320.
  5. That is a whole number: 1,320 pavers.

It means 120 spare pavers for cuts, breakage and later repairs.

Like the paver maker’s method, the calculator leaves out the thin joints between pavers.

How much extra to buy

LayoutExtra
Straight lines (running bond, stack bond)10%
Diagonal, herringbone or curved15 – 20%

Pavers for 100 square feet

PaverNo extra10% extra
4 × 8 in450495
6 × 6 in400440
6 × 9 in266.67294
12 × 12 in100110
12 × 24 in5055
16 × 16 in56.2562
24 × 24 in2528

FAQs

How do you calculate how many pavers you need?

Divide the area in square feet by the area of one paver, then add 10%. A 6 × 6 in paver covers 0.25 sq ft, so 300 sq ft takes 1,200 pavers, or 1,320 with 10% extra. Allow 15 – 20% for herringbone, diagonal or curved layouts.

Source Western Interlock · How to Calculate Paver Stones Needed for Your Project ↗

How thick are concrete pavers?

2 3/8 inches (60 mm) for patios, walks and home driveways. Streets and industrial areas need pavers at least 3 1/8 inches (80 mm) thick.

Source Concrete Masonry & Hardscapes Association (CMHA) · PAV-TEC-002, Construction of Interlocking Concrete Pavements ↗

Do you need concrete under pavers?

Not usually: the paving association’s method lays pavers on about 1 inch of bedding sand over a compacted aggregate base, not a slab. On well-drained soil the base should be at least 4 inches thick for patios and walks and 6 inches for home driveways, and thicker on wet or weak soil or in cold climates.

Sources

Related calculators