Series and Parallel Resistor Calculator

Resistors in a circuit can be joined end to end (in series) or side by side (in parallel). In series the resistances add up; in parallel the total is always less than the smallest one. Type your resistances in ohms, separated by commas (use k for thousands, like 4.7k, and M for millions), and pick parallel or series: 100, 220 and 470 Ω in parallel come to 59.9768 Ω.

Up to 100 values in ohms, separated by commas or spaces. 4.7k is 4,700 Ω and 1M is 1,000,000 Ω.

Total in parallel
59.9768 Ω

3 resistors in parallel come to 59.9768 Ω.

In series instead 790 Ω
Resistors 3

How to calculate resistors in parallel

Add up 1 ÷ each resistance, then take 1 ÷ that total. For two resistors this is the same as their product divided by their sum. In series it is simpler: add the resistances.

1 ÷ R = 1 ÷ R1 + 1 ÷ R2 + 1 ÷ R3 + …

Here it is with your numbers:

  1. Add the reciprocals: 1 ÷ 100 + 1 ÷ 220 + 1 ÷ 470 = 0.01667311411…
  2. Take the reciprocal of that: 1 ÷ 0.01667311411… = 59.97679814… Ω.
  3. Round to 6 significant figures: 59.9768 Ω.

It means they act like one 59.9768 Ω resistor: always less than the smallest one.

Source OpenStax College Physics 2e · 21.1 Resistors in Series and Parallel ↗

Resistors in series and parallel examples

OpenStax's example joins 1.00 Ω, 6.00 Ω and 13.0 Ω. In series they come to 20 Ω: Add the resistances: 1 + 6 + 13 = 20 Ω.

In parallel they come to 0.804124 Ω, which OpenStax rounds to 0.804 Ω: less than the smallest resistor, 1 Ω.

Two resistorsIn parallelIn series
100 and 10050 Ω200 Ω
100 and 22068.75 Ω320 Ω
220 and 330132 Ω550 Ω
470 and 1k319.728 Ω1.47 kΩ
1k and 1k500 Ω2 kΩ
1k and 2.2k687.5 Ω3.2 kΩ
4.7k and 10k3.19728 kΩ14.7 kΩ
10k and 10k5 kΩ20 kΩ

Values are in ohms; k means thousands. Every figure is rounded to 6 significant figures.

What is the difference between series and parallel?

In series, the same current flows through every resistor, one after another, and the voltage is shared between them, so the resistances add. In parallel, every resistor has the same voltage across it and the current splits between the paths, so adding a resistor gives the current another way through and the total goes down.

Two equal resistors in parallel make half of one: 220 Ω and 220 Ω make 110 Ω. A 0 Ω resistor in parallel is a short circuit: the current takes that path and the total is 0 Ω.

Source OpenStax College Physics 2e · 20.2 Ohm's Law: Resistance and Simple Circuits ↗

Sources

Related calculators