Voltage Divider Calculator

A voltage divider is two resistors in series that turn a bigger voltage into a smaller one: the output is taken across the second resistor, R2. Enter the input voltage and the two resistors to get the output, or switch to "Find R2" to get the resistor you need for a target voltage. 12 V across 10,000 Ω and 5,000 Ω gives 4 V.

V
Ω
Ω
Output voltage
4 V

12 V across 10,000 Ω and 5,000 Ω gives 4 V across R2.

Current 0.0008 A
Power in R1 0.0064 W
Power in R2 0.0032 W

How to calculate a voltage divider

Vout = Vin × R2 ÷ (R1 + R2). The two resistors are in series, so the same current, Vin ÷ (R1 + R2), flows through both, and the voltage across R2 is that current times R2. Turned round for a target output, R2 = R1 × Vout ÷ (Vin − Vout).

Vout = Vin × R2 ÷ (R1 + R2)

Here it is with your numbers:

  1. Add the resistors: 10,000 + 5,000 = 15,000 Ω.
  2. Multiply the input by R2 and divide by that total: 12 × 5,000 ÷ 15,000 = 4 V.

It means R2 takes 33.3333% of the input voltage, with nothing connected to the output.

Source OpenStax College Physics 2e · 21.1 Resistors in Series and Parallel ↗OpenStax College Physics 2e · 20.2 Ohm's Law: Resistance and Simple Circuits ↗

Voltage divider examples

R1 and R2 (Ω)From 5 VFrom 12 V
1k and 1k2.5 V6 V
10k and 10k2.5 V6 V
2k and 1k1.66667 V4 V
10k and 4.7k1.59864 V3.83673 V
10k and 3.3k1.2406 V2.97744 V
4.7k and 10k3.40136 V8.16327 V
1k and 2k3.33333 V8 V
22k and 10k1.5625 V3.75 V

Every figure is rounded to 6 significant figures; k means thousands of ohms.

What the answer assumes

The output here is with nothing connected to it. Anything you connect across R2 sits in parallel with it, which lowers the resistance at the bottom and so lowers the output voltage. The tiles show the current through the pair and the power each resistor turns into heat: power = current² × resistance.

Source OpenStax College Physics 2e · 20.4 Electric Power and Energy ↗

Sources

Related calculators