Siding Calculator

Find out how much siding a house needs. Enter the distance around the house, the wall height and any gables. You get the area in square feet, the squares of siding to order (a square is 100 sq ft), the 4 × 8 ft sheets if you use panel siding or plywood, and the nails, using the estimating method in the vinyl siding industry's installation manual.

sq ft
%
Squares of siding
13.6

Your walls and gables cover 1,360 sq ft: 13.6 squares of siding, so buy 14 squares, or 43 sheets of 4 × 8 ft panel siding.

Siding area 1,360 sq ft
4 × 8 ft sheets Buy 43
Roofing nails 13.6 lb

How to measure a house for siding

Measure the distance around the base of the house and the height of the walls. For each gable (the triangle under a pitched roof), measure its width at the bottom and its height to the peak: its area is ½ × height × width. The siding manual says to measure including windows; doors and windows are not usually taken off, which leaves an allowance for waste. Take off only very large openings, like a garage door or sliding glass doors.

The manual also says to add extra for waste depending on the roof pitch and the house, but gives no figure, so the waste box starts at 0. Waste adds siding and sheets, not nails.

Source Polymeric Exterior Products Association · Vinyl Siding Installation Manual, Getting Started ↗

How to calculate siding

squares = (walls + gables − big openings) × (1 + waste) ÷ 100

Here it is with your numbers:

  1. Walls: 140 × 8 = 1,120 sq ft.
  2. Gables: 2 × ½ × 30 × 8 = 240 sq ft.
  3. Siding area: 1,120 + 240 = 1,360 sq ft.
  4. Squares: 1,360 ÷ 100 = 13.6, so buy 14.
  5. Sheets: 1,360 ÷ 32 = 42.5, so buy 43.

It means you order 14 squares of lap siding, or 43 full sheets of panel siding, with about 13.6 lb of roofing nails (6.8 lb if you use aluminum nails).

Squares, sheets and nails

  • 1 square = 100 sq ft of siding: siding is ordered by the square.
  • A full plywood or panel siding sheet is 48 × 96 in (4 × 8 ft): 32 sq ft.
  • Nails: 0.01 lb per sq ft of siding for roofing nails, staples or screws, or 0.005 lb for aluminum nails.

Source NIST · Voluntary Product Standard PS 1-22, Structural Plywood ↗

Siding for common house sizes

Walls only, no gables, openings or waste.

HouseAreaSquares4 × 8 sheets
30 × 24 ft, 8 ft walls864 sq ft8.6427
40 × 30 ft, 8 ft walls1,120 sq ft11.235
50 × 30 ft, 9 ft walls1,440 sq ft14.445
60 × 40 ft, 9 ft walls1,800 sq ft1857

FAQs

How do you calculate how much siding you need?

Multiply each wall's height by its width, add half the height × width of each gable, and divide by 100 to get squares. The siding manual says windows and doors are not usually taken off: leaving them in covers waste. Very large openings, like a garage door, can be taken off.

Source Polymeric Exterior Products Association · Vinyl Siding Installation Manual, Getting Started ↗

How much is 1000 square feet of siding?

10 squares: siding is ordered by the square, 100 sq ft each. In 4 × 8 ft sheets it is 32 sheets (31.25).

How many sheets of 4x8 plywood to cover 10x10?

4 sheets. 10 × 10 ft is 100 sq ft, and a 4 × 8 ft sheet (48 × 96 in) is 32 sq ft: 100 ÷ 32 = 3.13, so you buy 4.

Source NIST · Voluntary Product Standard PS 1-22, Structural Plywood ↗

How many 4x8 sheets of plywood do I need for a 12x12 room?

For the floor, 5 sheets: 12 × 12 ft is 144 sq ft, and 144 ÷ 32 = 4.5. For the walls of an 8 ft high room, it is 48 ft around × 8 = 384 sq ft: 12 sheets.

How many square feet will 10 sheets of plywood cover?

320 sq ft. Each 4 × 8 ft sheet covers 32 sq ft.

Sources

Related calculators