How to calculate asphalt tonnage
Texas DOT works out hot-mix asphalt by area and thickness: 110 pounds for every square yard, for each inch of pavement, measured after it is rolled. Find the square yards (square feet ÷ 9), multiply by the inches and by 110, and divide by 2,000 pounds to the ton.
Here it is with your numbers:
- Area: 50 × 12 = 600 sq ft.
- Square yards: 600 ÷ 9 = 66.6667 sq yd.
- Pounds: 66.6667 × 3 × 110 = 22,000 lb.
- Tons: 22,000 ÷ 2,000 = 11, so 11 tons.
It means you'd order about 11 tons of hot-mix asphalt for this area once it is rolled to 3 inches.
Source Texas DOT 2024 Specifications · Item 341, Dense-Graded Hot-Mix Asphalt (PDF) ↗NIST Handbook 44 (2026) · Appendix C, General Tables of Units of Measurement ↗
How far a ton of asphalt goes
At 110 lb per square yard per inch.
| Thickness | Sq ft per ton | Tons per 100 sq ft |
|---|---|---|
| 1 in | 163.64 | 0.61 |
| 1.5 in | 109.09 | 0.92 |
| 2 in | 81.82 | 1.22 |
| 2.5 in | 65.45 | 1.53 |
| 3 in | 54.55 | 1.83 |
| 4 in | 40.91 | 2.44 |
FAQs
How do I calculate how much asphalt I need?
Square yards × inches × 110 lb, then divide by 2,000 for tons. Get square yards from length × width in feet ÷ 9. TxDOT uses 110 lb per square yard for each inch of compacted pavement.
Source Texas DOT 2024 Specifications · Item 341, Dense-Graded Hot-Mix Asphalt (PDF) ↗
How many sq ft will 1 ton of asphalt cover?
About 81.82 sq ft at 2 inches thick, 54.55 sq ft at 3 inches and 163.64 sq ft at 1 inch, at TxDOT's 110 lb per square yard per inch.
How much is 2000 sq ft of asphalt?
24.44 tons at 2 inches thick or 36.67 tons at 3 inches: 222.22 square yards × inches × 110 lb ÷ 2,000.
Sources
- Texas DOT 2024 Specifications: Item 341, Dense-Graded Hot-Mix Asphalt (PDF)
- NIST Handbook 44 (2026): Appendix C, General Tables of Units of Measurement