How many concrete blocks do I need?
A standard 8 × 16 in block is sold by its nominal size, which includes the 3/8 in mortar joint, so each block covers 8/9 of a square foot of wall. CMHA’s TEK 4-2A adds 5% for waste and breakage, which makes 119 blocks for every 100 sq ft. Take doors and windows off the wall area first.
Source Concrete Masonry & Hardscapes Association (CMHA) · TEK 4-2A, Estimating Concrete Masonry Materials ↗
How to calculate concrete blocks
Here it is with your numbers:
- Wall area: 40 × 8 = 320 sq ft.
- One block’s face, joint included: 8 × 16 = 128 sq in.
- Change the wall to square inches (× 144) and divide by one face: 320 × 144 ÷ 128 = 360 blocks.
- Add 5% for waste and breakage: 360 × 1.05 = 378.
- That is a whole number: 378 blocks.
- Mortar: one 70 lb bag of masonry cement lays about 30 blocks, 360 ÷ 30 = 12, so 12 bags.
It means 378 blocks and 12 bags of masonry cement for the mortar.
How much mortar for concrete blocks?
TEK 4-2A says one 70 lb bag of masonry cement lays about 30 hollow blocks when mortar goes on the face shells only. The calculator divides the blocks you lay (not the spares) by 30 and rounds up. Mix it with sand and water as the bag says.
Blocks for 100 square feet of wall
| Block face | No extra | 5% extra |
|---|---|---|
| 8 × 16 in (standard) | 112.5 | 119 |
| 8 × 8 in (half-length) | 225 | 237 |
| 4 × 16 in (half-high) | 225 | 237 |
FAQs
How do you calculate how many concrete blocks you need?
Divide the wall area in square feet by 8/9, then add 5%. The face of a standard 8 × 16 in block, with its mortar joint, covers 8/9 of a square foot, so 100 sq ft of wall takes 112.5 blocks, or 119 with 5% for waste and breakage. Take doors and windows off the wall area first.
Source Concrete Masonry & Hardscapes Association (CMHA) · TEK 4-2A, Estimating Concrete Masonry Materials ↗
How big is a cinder block?
A standard block is sold as 8 × 8 × 16 inches, but it actually measures 7 5/8 × 7 5/8 × 15 5/8 inches. Blocks are made 3/8 in smaller than their nominal size so that, with a 3/8 in mortar joint, each one fills an 8 × 16 in space in the wall.
Source Concrete Masonry & Hardscapes Association (CMHA) · TEK 5-12, Modular Layout of Concrete Masonry ↗
How much mortar do I need for a block wall?
One 70 lb bag of masonry cement for about 30 blocks, laid with mortar on the face shells, plus 1 ton of masonry sand for every 8 bags. That is about 240 blocks per ton of sand; with more than 3 tons, add half a ton for waste.
Source Concrete Masonry & Hardscapes Association (CMHA) · TEK 4-2A, Estimating Concrete Masonry Materials ↗
Sources
- Concrete Masonry & Hardscapes Association (CMHA): TEK 4-2A, Estimating Concrete Masonry Materials
- Concrete Masonry & Hardscapes Association (CMHA): TEK 5-12, Modular Layout of Concrete Masonry