Ladder Angle Calculator

  • Tested against OSHA’s one-quarter rule and 300 cases worked to 40 digits
  • Checked by Wayne Bickerton
  • Sources: OSHA
  • Updated November 12, 2026

Set the foot of a leaning ladder 1 ft out for every 4 ft of working length, which puts it at 75.52° to the ground: the one-quarter rule of the Occupational Safety and Health Administration (OSHA). Enter the working length (from the foot to where it rests) or the height to reach to get the foot distance, the height and the angle.

ft
Foot of the ladder, out from the support
4.00 ft

With 16.00 ft of ladder between the foot and the top support, set the foot 4.00 ft out, measured along the ground. It reaches 15.49 ft high.

Height it reaches 15.49 ft
Angle with the ground 75.52°
Working length 16.00 ft

What is the 4 to 1 ladder rule?

OSHA’s construction rule for ladders that lean against something, word for word:

“Non-self-supporting ladders shall be used at an angle such that the horizontal distance from the top support to the foot of the ladder is approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support).”

So for every 4 ft of ladder between the foot and the top support, the foot goes about 1 ft out. The working length is not the ladder’s full length: it stops where the ladder rests.

Source OSHA · 29 CFR 1926.1053, Ladders, (b)(5)(i) ↗

How to calculate a ladder’s angle

Distance out at the foot = working length ÷ 4 (OSHA’s one-quarter rule)

Here it is with your numbers:

  1. Divide the working length by 4: 16.00 ÷ 4 = 4.00 ft out.
  2. Height reached (Pythagoras): √(16.00² − 4.0000²) = 15.49 ft.

It means 1 ft out for every 4 ft of ladder between the foot and the top support.

The ladder, the wall and the ground make a right triangle with the ladder as its longest side. When the bottom side is a quarter of the ladder, the angle with the ground is the angle whose cosine is 1/4: 75.52°, whatever the ladder’s length.

Foot distance by working length

Working lengthFoot outHeight reached
8 ft2.00 ft7.75 ft
12 ft3.00 ft11.62 ft
16 ft4.00 ft15.49 ft
20 ft5.00 ft19.36 ft
24 ft6.00 ft23.24 ft
28 ft7.00 ft27.11 ft
32 ft8.00 ft30.98 ft

FAQs

What is the 4 to 1 rule of ladder?

Set the foot of the ladder 1 ft out for every 4 ft of ladder between the foot and the point where it rests. OSHA’s rule for leaning ladders: the horizontal distance from the top support to the foot is about one quarter of the working length.

Source OSHA · 29 CFR 1926.1053, Ladders, (b)(5)(i) ↗

What is the correct angle for ladders?

Following OSHA’s one-quarter rule, a leaning ladder stands at about 75.52° to the ground: the angle whose cosine is 1/4. A 16 ft working length puts the foot 4 ft out and reaches 15.49 ft up.

How to calculate the angle of a ladder?

Divide the distance from the wall to the foot by the working length, and find the angle with that cosine. A foot 4 ft out on a 16 ft working length gives 4 ÷ 16 = 0.25, which is 75.52°.

Sources

Related calculators