How to convert watts to amps for alternating current (AC) and DC
Divide the watts by the volts for DC, or for AC with a power factor of 1. With a lower power factor, divide by the power factor too. On three-phase AC, also divide by √3 (1.732…), using the voltage between two of the lines.
- DC: amps = watts ÷ volts
- Single-phase AC: amps = watts ÷ (power factor × volts)
- Three-phase AC: amps = watts ÷ (√3 × power factor × volts)
Going the other way, watts = amps × volts, times the power factor on AC, and times √3 on three-phase.
Here it is with your numbers:
- Multiply the power factor by the volts: 1 × 120 = 120.
- Divide the watts by that: 1,500 ÷ 120 = 12.5 A.
It means a 1,500-watt load on 120 volts draws 12.5 amps.
Source OpenStax College Physics 2e · 20.4 Electric Power and Energy ↗OpenStax College Physics 2e · 23.12 RLC Series AC Circuits (power factor) ↗U.S. Department of Energy · Determining Electric Motor Load and Efficiency (fact sheet, PDF) ↗
Amps for common wattages
| Watts | Amps at 120 V | Amps at 240 V |
|---|---|---|
| 60 W | 0.5 | 0.25 |
| 100 W | 0.833333 | 0.416667 |
| 300 W | 2.5 | 1.25 |
| 500 W | 4.16667 | 2.08333 |
| 750 W | 6.25 | 3.125 |
| 1,000 W | 8.33333 | 4.16667 |
| 1,200 W | 10 | 5 |
| 1,500 W | 12.5 | 6.25 |
| 1,800 W | 15 | 7.5 |
| 2,000 W | 16.6667 | 8.33333 |
| 2,400 W | 20 | 10 |
| 3,000 W | 25 | 12.5 |
| 3,600 W | 30 | 15 |
| 4,800 W | 40 | 20 |
| 5,000 W | 41.6667 | 20.8333 |
For a power factor of 1, such as a heater, rounded to 6 significant figures. A load with a lower power factor draws more amps for the same watts.
What is the power factor?
On AC, the voltage and current rise and fall many times a second. In a heater they rise and fall together, and every amp does useful work. In a motor they are out of step, so part of the current does no work. The power factor, a number from 0 to 1, is the share of the volts × amps that turns into real watts. A purely resistive load has a power factor of 1.
That is why the page also shows the apparent power in volt-amperes (VA): volts × amps before the power factor. It equals the watts when the power factor is 1, and it is always the watts ÷ the power factor.
Source OpenStax College Physics 2e · 20.5 Alternating Current versus Direct Current ↗
Three-phase power
Bigger motors usually run on three-phase power: three wires carry AC that peaks at different moments, so the total power stays steady. Use the voltage between two of the lines, the one motors and services are usually rated in, which is 1.73 times the voltage from a line to neutral. Then the power is volts × amps × power factor × √3.
This page does the arithmetic only. It doesn't size wires, fuses or breakers: those follow the electrical code.
FAQs
How many watts are in an amp?
It depends on the voltage: watts = amps × volts. On 120 volts, 1 amp is 120 watts; on a 12-volt car battery, it is 12 watts. On AC, this holds for a power factor of 1, such as a heater.
Source OpenStax College Physics 2e · 20.4 Electric Power and Energy ↗
What is 20 amps in watts?
2,400 watts on 120 volts, because 20 × 120 = 2,400, for a power factor of 1. On 240 volts it is 4,800 watts, and on 12 volts it is 240 watts.
Is 1500 watts equal to 15 amps?
No: 1,500 watts on 120 volts is 12.5 amps, because 1,500 ÷ 120 = 12.5, for a power factor of 1. It would be 15 amps only on 100 volts.
How many amps is 300w at 12v?
25 amps, because 300 ÷ 12 = 25. Amps are the watts divided by the volts.
Sources
- OpenStax College Physics 2e: 20.4 Electric Power and Energy
- OpenStax College Physics 2e: 20.5 Alternating Current versus Direct Current
- OpenStax College Physics 2e: 23.12 RLC Series AC Circuits (power factor)
- U.S. Department of Energy: Determining Electric Motor Load and Efficiency (fact sheet, PDF)