What is a t table?
A t table lists the critical values of Student’s t distribution. You use it in a t-test, the test for a mean when the population standard deviation is unknown and you estimate it from the sample. Each row is a number of degrees of freedom (for one sample, the sample size minus 1) and each column a significance level, α.
The t distribution is symmetric, so tables show only positive values. For a two-tailed test, reject the null hypothesis when the test statistic is beyond the critical value on either side; for an upper one-tailed test, when it is above it; for a lower one, when it is below its negative.
Source OpenStax Introductory Statistics 2e · 9.3 Probability distribution needed for hypothesis testing ↗NIST/SEMATECH e-Handbook · 1.3.6.7.2 Critical values of the Student’s t distribution ↗
How to read a t table
Here it is with your numbers:
- Two tails share α: 0.05 ÷ 2 = 0.025 in each tail.
- In the table, row 10 and the one-tail 0.025 column give 2.228.
It means that if the null hypothesis is true, a t statistic beyond −2.228 or 2.228 turns up only 5% of the time (with 10 degrees of freedom).
In Excel, =T.INV.2T(α, df) gives the two-tailed value and =T.INV.2T(2*α, df) the one-tailed value.
Source Microsoft Support · T.INV.2T function ↗
T table (critical values of t)
Rows are degrees of freedom; the ∞ row is the normal curve. Each column heading is the area in one tail, with the two-tailed α in brackets.
| df | 0.10 (0.20) | 0.05 (0.10) | 0.025 (0.05) |
|---|---|---|---|
| 1 | 3.078 | 6.314 | 12.706 |
| 2 | 1.886 | 2.920 | 4.303 |
| 3 | 1.638 | 2.353 | 3.182 |
| 4 | 1.533 | 2.132 | 2.776 |
| 5 | 1.476 | 2.015 | 2.571 |
| 6 | 1.440 | 1.943 | 2.447 |
| 7 | 1.415 | 1.895 | 2.365 |
| 8 | 1.397 | 1.860 | 2.306 |
| 9 | 1.383 | 1.833 | 2.262 |
| 10 | 1.372 | 1.812 | 2.228 |
| 11 | 1.363 | 1.796 | 2.201 |
| 12 | 1.356 | 1.782 | 2.179 |
| 13 | 1.350 | 1.771 | 2.160 |
| 14 | 1.345 | 1.761 | 2.145 |
| 15 | 1.341 | 1.753 | 2.131 |
| 16 | 1.337 | 1.746 | 2.120 |
| 17 | 1.333 | 1.740 | 2.110 |
| 18 | 1.330 | 1.734 | 2.101 |
| 19 | 1.328 | 1.729 | 2.093 |
| 20 | 1.325 | 1.725 | 2.086 |
| 21 | 1.323 | 1.721 | 2.080 |
| 22 | 1.321 | 1.717 | 2.074 |
| 23 | 1.319 | 1.714 | 2.069 |
| 24 | 1.318 | 1.711 | 2.064 |
| 25 | 1.316 | 1.708 | 2.060 |
| 26 | 1.315 | 1.706 | 2.056 |
| 27 | 1.314 | 1.703 | 2.052 |
| 28 | 1.313 | 1.701 | 2.048 |
| 29 | 1.311 | 1.699 | 2.045 |
| 30 | 1.310 | 1.697 | 2.042 |
| 40 | 1.303 | 1.684 | 2.021 |
| 50 | 1.299 | 1.676 | 2.009 |
| 60 | 1.296 | 1.671 | 2.000 |
| 80 | 1.292 | 1.664 | 1.990 |
| 100 | 1.290 | 1.660 | 1.984 |
| 120 | 1.289 | 1.658 | 1.980 |
| 1000 | 1.282 | 1.646 | 1.962 |
| ∞ | 1.282 | 1.645 | 1.960 |
| df | 0.01 (0.02) | 0.005 (0.01) | 0.001 (0.002) |
|---|---|---|---|
| 1 | 31.821 | 63.657 | 318.309 |
| 2 | 6.965 | 9.925 | 22.327 |
| 3 | 4.541 | 5.841 | 10.215 |
| 4 | 3.747 | 4.604 | 7.173 |
| 5 | 3.365 | 4.032 | 5.893 |
| 6 | 3.143 | 3.707 | 5.208 |
| 7 | 2.998 | 3.499 | 4.785 |
| 8 | 2.896 | 3.355 | 4.501 |
| 9 | 2.821 | 3.250 | 4.297 |
| 10 | 2.764 | 3.169 | 4.144 |
| 11 | 2.718 | 3.106 | 4.025 |
| 12 | 2.681 | 3.055 | 3.930 |
| 13 | 2.650 | 3.012 | 3.852 |
| 14 | 2.624 | 2.977 | 3.787 |
| 15 | 2.602 | 2.947 | 3.733 |
| 16 | 2.583 | 2.921 | 3.686 |
| 17 | 2.567 | 2.898 | 3.646 |
| 18 | 2.552 | 2.878 | 3.610 |
| 19 | 2.539 | 2.861 | 3.579 |
| 20 | 2.528 | 2.845 | 3.552 |
| 21 | 2.518 | 2.831 | 3.527 |
| 22 | 2.508 | 2.819 | 3.505 |
| 23 | 2.500 | 2.807 | 3.485 |
| 24 | 2.492 | 2.797 | 3.467 |
| 25 | 2.485 | 2.787 | 3.450 |
| 26 | 2.479 | 2.779 | 3.435 |
| 27 | 2.473 | 2.771 | 3.421 |
| 28 | 2.467 | 2.763 | 3.408 |
| 29 | 2.462 | 2.756 | 3.396 |
| 30 | 2.457 | 2.750 | 3.385 |
| 40 | 2.423 | 2.704 | 3.307 |
| 50 | 2.403 | 2.678 | 3.261 |
| 60 | 2.390 | 2.660 | 3.232 |
| 80 | 2.374 | 2.639 | 3.195 |
| 100 | 2.364 | 2.626 | 3.174 |
| 120 | 2.358 | 2.617 | 3.160 |
| 1000 | 2.330 | 2.581 | 3.098 |
| ∞ | 2.326 | 2.576 | 3.090 |
FAQs
What is a t-distribution table?
It lists critical values of t for each number of degrees of freedom and each significance level. A test rejects the null hypothesis when its t statistic is beyond the critical value. NIST’s table shows only positive values because the t distribution is symmetric.
Source NIST/SEMATECH e-Handbook · 1.3.6.7.2 Critical values of the Student’s t distribution ↗
Can you explain the t-distribution in simple terms?
It is the curve a t-test uses. It looks like the normal (bell) curve, but it is for when you don’t know the population’s standard deviation and use the sample’s instead. With few degrees of freedom its critical values are larger; with many, they are close to the normal curve’s (2.009 at 50 degrees of freedom against 1.960).
Source OpenStax Introductory Statistics 2e · 9.3 Probability distribution needed for hypothesis testing ↗
How to read the t table?
Pick the row for your degrees of freedom (usually the sample size minus 1). For a two-tailed test, split α between the two tails and use that column: α = 0.05 means 0.025 in each tail, so row 10 gives 2.228. For a one-tailed test, use the column for α itself (1.812).
Source NIST/SEMATECH e-Handbook · 1.3.6.7.2 Critical values of the Student’s t distribution ↗
How to get t-distribution in Excel?
=T.INV.2T(α, df) gives the two-tailed critical value: =T.INV.2T(0.05, 10) is 2.228139. For a one-tailed value, double α: =T.INV.2T(0.1, 10) is 1.812461. Microsoft’s page prints these as 2.28139 and 1.812462; NIST’s table (2.228 and 1.812) and this page agree on 2.228139 and 1.812461.
Sources
- NIST/SEMATECH e-Handbook: 1.3.6.7.2 Critical values of the Student’s t distribution
- OpenStax Introductory Statistics 2e: 9.3 Probability distribution needed for hypothesis testing
- Microsoft Support: T.INV.2T function