What are degrees, minutes and seconds?
A degree is split into 60 minutes (′), and each minute into 60 seconds (″), just as an hour is split into minutes and seconds. So 1° is 3,600″. Writing 40° 26′ 46″ means 40 degrees, 26 minutes and 46 seconds. Decimal degrees write the same angle as one number, 40.446111°, which is what most map apps and spreadsheets expect.
Source NIST Guide to the SI (SP 811) · Chapter 5, Table 6 (degree, minute and second of angle) ↗
How to convert DMS to decimal degrees
Here it is with your numbers:
- Divide the minutes by 60: 26 ÷ 60 = 0.4333333333…
- Divide the seconds by 3,600: 46 ÷ 3,600 = 0.01277777777…
- Add them to the degrees: 40 + 0.4333333333… + 0.01277777777… = 40.44611111…
- Round to 6 decimals: 40.446111°.
It means 40° 26′ 46″ N and 40.446111° are the same line of latitude, north of the equator.
Going the other way, the whole number is the degrees, the decimal part × 60 gives the minutes, and what is left × 60 gives the seconds. Seconds are rounded to 2 decimals, and 60″ carries over into the next minute, so it never shows.
North, south, east and west
Latitude runs from 0° at the equator to 90° at the poles, and longitude from 0° at the prime meridian to 180° east or west. In decimal degrees there are no letters: south latitudes and west longitudes are written as negative numbers. So 33° 52′ 4″ S is −33.867778°, and 73° 59′ 8.5″ W is −73.985694°.
Source USGS Open-File Report 96-707 · Navigation data format (south and west negative) ↗
How precise is each format?
| One | Of latitude | Of longitude at 38° N |
|---|---|---|
| Degree | 69 miles | 54.6 miles |
| Minute | 1.15 miles | 0.91 mile |
| Second | 101 feet | 80 feet |
A degree of latitude is about the same length everywhere, but degrees of longitude get shorter toward the poles, where the lines meet. The sixth decimal place of a degree, 0.000001°, is 0.0036″: about 4 inches of latitude, which is why we round decimal degrees there.
Source USGS FAQ · How much distance does a degree, minute, and second cover on your maps? ↗
FAQs
How do I convert degrees, minutes, and seconds to decimal coordinates?
Divide the minutes by 60 and the seconds by 3,600, and add both to the degrees. Then make south latitudes and west longitudes negative. 40° 26′ 46″ N is 40 + 26 ÷ 60 + 46 ÷ 3,600, which is 40.446111°.
Source NIST Guide to the SI (SP 811) · Chapter 5, Table 6 (degree, minute and second of angle) ↗
How do I convert degrees, minutes, and seconds to just degrees?
The same way: degrees + minutes ÷ 60 + seconds ÷ 3,600. 1° 30′ is 1.5°, because 30 minutes is half a degree.
How do I convert decimal degrees to degrees, minutes, and seconds?
Keep the whole number as the degrees, then multiply the decimal part by 60: the whole number of that is the minutes. Multiply what is left by 60 again for the seconds. For 40.446111°: 0.446111 × 60 is 26.76666, so 26′, and 0.76666 × 60 is 45.9996, so 46″.
How do I convert degrees to minutes and seconds?
A degree is 60 minutes or 3,600 seconds, so multiply by 60 for minutes or by 3,600 for seconds: 2.5° is 150 minutes, or 9,000 seconds.
Sources
- NIST Guide to the SI (SP 811): Chapter 5, Table 6 (degree, minute and second of angle)
- USGS Open-File Report 96-707: Navigation data format (south and west negative)
- USGS FAQ: How much distance does a degree, minute, and second cover on your maps?