Dilution Calculator

  • Tested against OpenStax Chemistry's three dilution examples and 1,600 cases worked out to 50 digits
  • Checked by Wayne Bickerton
  • Sources: OpenStax Chemistry 2e
  • Updated November 11, 2026

Diluting keeps the amount of solute the same, so C1 × V1 = C2 × V2: for 5.00 L of 0.100 M from a 1.59 M stock, take 0.314 L of stock and add water. Pick the value you need, type the other three, and the calculator solves C1V1 = C2V2: C1 and V1 are the stock's concentration and volume, C2 and V2 the diluted solution's. Use any units, as long as both concentrations match and both volumes match.

For bleach and other cleaning products, follow the directions on the label instead.

Stock volume (V1)
0.3145

Take 0.3145 of the stock and add solvent up to 5, a total of 4.686 more.

Solvent to add 4.686
Dilution factor 15.90×
Formula 1.59 × 0.3145 = 0.1 × 5

How to calculate a dilution

Diluting adds solvent but not solute, so the amount of solute before and after is the same: C1 × V1 = C2 × V2. Rearrange it for the one you don't know. OpenStax's example: to make 5.00 L of 0.100 M KOH from a 1.59 M stock, take 0.100 × 5.00 ÷ 1.59 = 0.314 L of the stock and add water up to 5.00 L.

C1 × V1 = C2 × V2

Here it is with your numbers:

  1. Multiply C2 by V2 and divide by C1: 0.1 × 5 ÷ 1.59 = 0.3145.
  2. Solvent to add: 5 − 0.3145 = 4.686.

It means 1.59 × 0.3145 and 0.1 × 5 hold the same amount of solute; only the solvent changes.

Source OpenStax Chemistry 2e · 3.3 Molarity (Dilution of Solutions) ↗

Check the answer makes sense

A dilution always makes the solution weaker and bigger: C2 is below C1 and V2 above V1. OpenStax suggests a quick estimate first: diluting 0.850 L to 1.80 L more than doubles the volume, so the new concentration should be less than half the old one (5.00 M becomes 2.36 M).

Sources

Related calculators