Tank Volume Calculator

Find how much a tank holds, in US gallons and liters. Pick its shape, type its size and how deep the liquid is, and you get the gallons at that depth, the full capacity and a chart of gallons by depth, handy with a dipstick. Lying (horizontal) tanks are worked out properly: an inch near the middle holds more than an inch at the bottom.

Measure the inside of the tank. For a full tank, make the depth the same as the height (the diameter for a lying tank).

US gallons at this depth
282.0089 60% full

An upright tank 48 in across and 60 in high, filled 36 in deep, holds 282.0089 US gallons. Full, it holds 470.0149.

Full tank 470.0149 gal
Liters at this depth 1,067.52 L
Full tank in liters 1,779.1999 L

How to calculate tank volume

V = π × (diameter ÷ 2)² × depth

Here it is with your numbers:

  1. V = π × (48 ÷ 2)² × 36
  2. V = 65,144.0653 in³
  3. gallons = 65,144.0653 ÷ 231
  4. gallons = 282.0089

It means the tank is 60% full: 282.0089 of its 470.0149 US gallons.

A US gallon is 231 cubic inches, so a cubic foot holds 7.4805 gallons and a cubic meter 1,000 liters (264.1721 gallons).

Source OpenStax · Prealgebra 2e, 9.6 Solve Geometry Applications: Volume and Surface Area ↗NIST Handbook 44 (2026) · Appendix C, General Tables of Units of Measurement (gallon = 231 cubic inches) ↗

Gallons by depth

Your tank, from full to empty. Your depth is highlighted when it falls on a row.

DepthUS gallonsFull
60 in470.0149100.0%
54 in423.013490.0%
48 in376.011980.0%
42 in329.010470.0%
36 in282.008960.0%
30 in235.007550.0%
24 in188.006040.0%
18 in141.004530.0%
12 in94.003020.0%
6 in47.001510.0%
0 in0.00000.0%

Lying (horizontal) tanks

In an upright tank, every inch of depth holds the same amount. In a lying tank it doesn’t: the liquid is narrow at the bottom and widest in the middle, so a tank filled a quarter of the way up is only about 20% full, not 25%.

The end of the liquid is a slice of the circle (a segment). Its area is the wedge from the center (a sector, r² × t, where t is half the angle in radians) minus the triangle above the liquid, (r − depth) × √(2 × r × depth − depth²). Times the length, that is the volume. These formulas assume flat ends: tanks with rounded (domed) ends hold a little more.

Source OpenStax · Precalculus 2e, 5.1 Angles (area of a sector) ↗OpenStax · Algebra and Trigonometry 2e, 10.1 Non-right Triangles: Law of Sines (area of a triangle from two sides and an angle) ↗

FAQs

How to calculate volume for a tank?

Multiply the area of its end by its length or height. A cylinder is π × radius² × height; a rectangular tank is length × width × height. Measure the inside, in inches, and divide the cubic inches by 231 for US gallons.

Source OpenStax · Prealgebra 2e, 9.6 Solve Geometry Applications: Volume and Surface Area ↗

How many gallons is a 24x16x12 tank?

If those are inches, the tank is 24 × 16 × 12, which is 4,608 cubic inches, and 4,608 ÷ 231 is 19.9481 US gallons, about a 20-gallon tank.

Source NIST Handbook 44 (2026) · Appendix C, General Tables of Units of Measurement (gallon = 231 cubic inches) ↗

How many gallons is a 10x10x10 tank?

4.329 US gallons if the sides are inches: 1,000 cubic inches ÷ 231. If they are feet, it is 1,000 cubic feet, which is 7,480.5195 gallons.

How do I convert the volume of a cylinder from inches to gallons?

Work out π × radius² × height in cubic inches, then divide by 231, because one US gallon is 231 cubic inches.

Sources

Related calculators