Horsepower Calculator

Have a torque figure and an engine speed from a spec sheet or a dyno run? Type them in to get the horsepower, plus kilowatts and metric horsepower (PS). Or switch to find the torque behind a horsepower figure. Engine speed is in revolutions per minute (rpm).

rpm
Horsepower
228.48 hp

300 lb-ft of torque at 4,000 rpm is 228.48 horsepower.

Kilowatts 170.38 kW
Metric horsepower 231.65 PS
Torque in N·m 406.75 N·m

How to calculate horsepower from torque

Horsepower = torque (lb-ft) × rpm ÷ 5,252.113

Here it is with your numbers:

  1. Multiply torque by rpm: 300 × 4,000 = 1,200,000.
  2. Divide by 5,252.113: 1,200,000 ÷ 5,252.113 = 228.48 hp.

It means the engine makes 228.48 hp (170.38 kW) at 4,000 rpm.

Where 5,252 comes from: NIST defines 1 horsepower as 550 foot-pounds per second. Power is torque times turning speed, and one turn is 2π radians, so a torque in lb-ft at a speed in rpm makes lb-ft × rpm × 2π ÷ 60 foot-pounds per second. Divide by 550 and you get lb-ft × rpm ÷ 5,252.113.

Source NIST Guide to the SI (SP 811) · Appendix B.8, factors for units listed alphabetically ↗

Why torque and horsepower curves cross at 5,252 rpm

At 5,252 rpm the formula divides by the same number it multiplies by, so horsepower equals lb-ft. Below 5,252 rpm an engine's torque number is bigger than its horsepower; above it, horsepower is bigger. In N·m the curves don't cross there, because the units are different.

Horsepower chart

Horsepower for a steady torque at common engine speeds.

Torque2,000 rpm4,000 rpm6,000 rpm
100 lb-ft38.0876.16114.24
200 lb-ft76.16152.32228.48
300 lb-ft114.24228.48342.72
400 lb-ft152.32304.64456.96
500 lb-ft190.40380.80571.20

Horsepower, kilowatts and metric horsepower

  • 1 hp = 745.7 W (0.7457 kW), from 550 foot-pounds per second.
  • 1 metric horsepower (PS) = 735.5 W, so a PS is a little smaller than a hp.
  • 1 lb-ft = 1.3558 N·m of torque.

FAQs

How do I calculate horsepower from torque?

Multiply the torque in lb-ft by the rpm and divide by 5,252. 300 lb-ft at 4,000 rpm is 300 × 4,000 ÷ 5,252.113 = 228.48 hp. The 5,252 comes from 33,000 ÷ 2π: a horsepower is 550 foot-pounds per second, and one turn is 2π radians.

Source NIST Guide to the SI (SP 811) · Appendix B.8, factors for units listed alphabetically ↗

How much torque is 1 hp?

It depends on the engine speed, because power is torque times speed. At 5,252 rpm, 1 hp takes 1 lb-ft of torque. At 2,626 rpm it takes 2 lb-ft, and at 10,504 rpm only half a lb-ft.

What does torque measure, and how is it related to horsepower?

Torque is the turning force on the crankshaft, measured in pound-feet (lb-ft) or newton meters (N·m). Horsepower is how fast that force does work: torque times engine speed. NIST defines 1 horsepower as 550 foot-pounds per second, which is 745.7 watts.

Sources

Related calculators